What factors should be considered when buying children's bicycles?

Matters needing attention when children buy bicycles are as follows:

1. Security

Safety, hinder the function of safety and design, although beautiful, also should choose carefully. For example, there are parts on the car sharp or protruding, (according to European and American regulations, the length of protruding screws can not exceed its diameter). To check whether the welding is firm (whether the weld is uniform and neat), try to ride the appropriate children's bicycle, the safety control line of the seat and handlebar should not be exposed, should be inserted into the seat tube and the front tube. The protruding part of the positioning gasket installed by the guard wheel should be stuck into the rear fork notch, and the protruding foot of the positioning gasket fixed on the front fork should also be stuck into the positioning hole of the front fork leg. Otherwise, serious accidents will be caused in the process of riding. The brake of a 12-inch car is not particularly important, because most children will not use it at this stage. When riding, there are guard wheels, which are not fast and often accompanied by parents. Bicycles over 16 inches must be fully checked for brake performance, standards and inspection. The same for people and cars. Most children are riding 16 inch car, really learn to ride, and lifelong benefits.

2. Is your ride brisk

There is no way for parents to test whether riding is brisk, but there are some simple ways to judge. For example, you can ask the salesman whether the central axle of the car is made of metal bearings or plastic parts, whether the front tube of the car is installed on the front fork is made of plastic parts (which can be easily identified), and whether the rims of the car are made of steel, inflatable or plastic foam. Judgment criteria is relatively simple, that is, the use of plastic parts, the transmission effect will be worse than metal parts, riding and steering is not flexible and light.

3. The material

Whether the material of plastic parts passes the standard can be judged by observing the color and feel. Bright color, strong sense of transparency, feel warm and moist material is good. Plastic parts if the color is not bright and uniform, and in winter when the temperature is low, it is easy to break. Summer long time sun, also can quickly aging fade, brittle cracking.

4. The attachment

The accessories are reasonable, and the children's bicycles sold in China are often fully equipped with clay plates, toolboxes, baskets and so on. As a matter of fact, most of the children are the only child now, so the possibility of riding in rainy days and mud is almost zero. If the mud board has sharp edges or protrusions, it will have safety risks. In my opinion, it is a superfluous part. Therefore, it is recommended not to install too many accessories on 12-inch and 16-inch bicycles. In fact, it is just good for parents, but it is actually laborious for children to ride. 20 inch car, the child is bigger, but also have the strength and skills to control the car, the opportunity to go out independently is also more, should consider equipped with hanger and front car blue, with mud before and after, no longer need auxiliary wheels, but should be equipped with foot support.

5. Tyre

The outer tire should have a clear pattern and the inner tube should be better, otherwise the parents will have a good way to exercise. Every time the baby rides a bike, you begin to exercise and pump up the car. Finally, I have to go to the repair shop to change the inner tube. Some are inflatable, and some are solid. Solid tires are not as elastic as inflatable tires, no matter how elastic they are.

In conclusion, the car is for the baby to ride, you should choose a car crouch down, from his point of view to buy a beautiful and safe and practical children's bike.